Jib Cranes are suited for loading unloading of jobs on the machining center or assembly station. These offer high productivity and are ideally suited for loading and unloading from trucks in Stores or Individual machines.

Cubuilt Wall Mounted Jib Crane can be mounted on an existing column or on a wall structure that provides 180 degrees of boom rotation. We can also offer self-supported pillar-mounted Jib cranes with 360 degrees of boom rotation.

Our products are manufactured under the close supervision of experienced and qualified professionals.

Benefits of Jib Cranes

Some models can be attached to the rear of a truck, providing the jib crane with exceptional mobility. Here are the three top benefits that each jib crane can bring to any job site.

Incredibly Strong

Each crane comes with a great amount of strength. The maximum lifting & load capacity varies, but all jib cranes made by Cubuilt are strong. Cubuilt Jib Crane is designed with the ability to hold a load on its own because it carries most of the weight of the load. All other parts of the jib crane are equally strong, giving the operator the ability to perform any lifting task that otherwise would be impossible.

Great Reach

Cubuilt Jib crane provides the crane with greater reach than a usual hoist. The usual hoist is positioned in one place and lifts items straight up and sets them down at some higher point. But the usual hoist can not move loads to a new location and cannot reach loads that are not rolled into position. This is why today the jib is the key element of almost every Jib crane.

Loading/Unloading Abilities

Most jib cranes made by Cubuilt can rotate for 360°, which makes them ideal for loading and unloading flatbed trucks, for example. The operators need to only drive the jib crane to the truck. Cubuilt Jib crane can take everything from the flatbed truck, pivot around, and lay the loads on the ground. Additionally, the jib cranes are quite efficient material handlers and can be used for saving time and effort by putting the materials into position.

Jib cranes consist of a rotating arm with a hoist that runs along its length. The arm usually revolves on an axis which can be a fixed, ground-mounted post, or can be a wall or ceiling-mounted pin. Wall bracket-mounted jib cranes are usually the least expensive jib cranes. Cubuilt manufactured cantilever Jib crane allows the largest lift. They also exert less force on the wall on which they’re mounted. Jib lifts are sold that slip onto the forks of a forklift, turning it into a mobile crane. We manufacture Jib crane as per your requirement, model, portability, telescoping arms, articulating arms, motorized rotation, motorized trolley movement, etc.