Goliath Crane | Semi Goliath Cranes

Goliath Crane ,Semi Goliath Crane/Gantry Cranes are self-propelled cranes running on rails installed at ground level. Gantry Cranes are generally used for moving heavy loads, often outdoors.

When part use of shop bay is required a Semi-Goliath/Gantry Crane is useful.
e.g. Open Warehouses and Docks or Bulk Storage Areas. It’s also widely used in Construction and Infrastructure Development

Depending on the application and agreement with the buyer, special protection is offered for field service cranes. These special features can be: – Corrosion allowance in the construction of the main load-bearing components, drilled holes on a walkway to avoid rainwater accumulation, local full coverage for trolleys, covers for motor/brake for long journeys, additional parking brake for long journeys, special paintwork, etc.

Semi Goliath Cranes are typically used at

• Construction sites
• Workshops where existing columns cannot bear the wheel loads of a bridge crane
• Locations where bay lengths are excessive
• Locations where bay lengths do not remain constant
• Locations where loads are to be shifted from points outside the crane span as in the case of an overhang on either side of
  the rails
• Precise control of the up/down motion and/or travel motion can be achieved by fitting Variable Frequency Drives in the
  panels. Control can be either through a Pendant Push Button station or a Radio Remote Control (optional).